QuantityNameSKUEachTotal
Domer 5" diameter (Includes 14.60 shipping within USA) $150.60 $150.60
Hammer head - 416 stainless 17.5 gram with ball back end (no handle) $68.00 $68.00
CarbaltXD with 3 Degree Taper - 5 pack $115.00 $115.00
Template - 70 degree Bulino Lindsay Uniform-Parallel Heel $27.00 $27.00
Tungsten Dead Blow™ Piston - Sold with an AirGraver handpiece $125.00 $125.00
CarbaltXD - Three pieces with 3 degree taper & Two pieces with two Degree Taper, total five $115.00 $115.00
Template - Ray Cover, Background Flat $23.00 $23.00
Sanding Block for Engravers $149.00 $149.00
Template - Extra Negative Detailing 96 degree $27.00 $27.00
Deluxe Foot Control NitroG20 engraving set with sharpener $2,088.00 $2,088.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Piston - Light weight w/o nylon front end $125.00 $125.00
Basic Kentucky Long Rifle manual engraving set $236.00 $236.00
Template - Dario Cortini Bulino $21.00 $21.00
NitroG20 AirGraver handpiece with PalmControl (supple Santoprene handle) - PalmControl AirGravers are generally shipping 10 to 15 working days after receiving payment. $2,990.00 $2,990.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Rotary Foot disc pedal (for operating rotary handpieces) $69.00 $69.00
NitroG20 AirGraver handpiece with PalmControl (Damascus handle) $3,410.00 $3,410.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Chasing Hammer - A: 17.5 - ball back end- hardened 58RC - left straw color after tempering $78.00 $78.00
Template - Narrower $8.00 $8.00
Bulldozer fixture and Arkansas stone $58.00 $58.00
Quick Change Extension - Single Index (5 pack) $47.50 $47.50
Template - Hex Large Stipple $16.00 $16.00
Basic Coin Carving Set (with three diamond bench stones) $292.00 $292.00
Bead Stone Setting Sharpening Set $377.50 $377.50
Hammer head - 416 stainless 38 gram (1.4 oz) with small face back end (no handle) $68.00 $68.00
Burl Handle for Foot Control AirGraver $199.00 $199.00
Chasing Hammer - F: 38 grams (1.4oz) - small face back end - hardened 58RC - polished after tempering $89.00 $89.00
Chasing Hammer - E: 38 grams (1.4oz) - small face back end - hardened 58RC - left straw color after tempering $78.00 $78.00
Knuled Nut $6.00 $6.00
Chasing Hammer B: 17.5 grams - ball back end- hardened 58RC - polished after tempering $89.00 $89.00
Classic AirGraver handpiece with foot control, idle adjust with double regulators (Includes stainless piston and tungsten piston) $1,369.00 $1,369.00
Template - Mike Dubber - Speitzer point $42.00 $42.00
Template 110 Lindsay Uniform-Parallel Heel $23.00 $23.00
Burl Handle Manual Stainless Palm-Push Adjustable Graver $199.00 $199.00
CarbaltXD with 2 Degree Taper - 5 pack $115.00 $115.00
$50 Gift Card for use toward Lindsay Tools: AirGraver.com $50.00 $50.00
Border Scribe $69.00 $69.00
CO2 adapter. For accepting the piercing type 16 gram threaded neck CO2 cartridges in a CO2 Regulator, that is normally for the 587 gram (20 oz) CO2 paintball cylinders. $78.00 $78.00
Template - 60-70 degree $24.00 $24.00
Classic AirGraver handpiece with PalmControl (burl wood handle) PalmControl AirGravers are generally shipping 10 to 15 working days after receiving payment. $2,890.00 $2,890.00
Updating a foot control Classic or Artisan Airgraver handpiece to PalmControl - PalmControl AirGravers are generally shipping 10 to 15 working days after receiving payment. $1,790.00 $1,790.00
Nickel Holder $67.00 $67.00
Template - Inverted 105 degree $22.00 $22.00
Template - All five of the inverted point templates $110.00 $110.00
Chasing Hammer Handle - No Head $15.00 $15.00
Jett Ballistic (with Kevlar) $30.00 $30.00
Chasing Hammer - D: 20 grams - small face back end - hardened 58RC - polished after tempering $89.00 $89.00
Artisan AirGraver handpiece with foot control, idle adjust with double regulators (Includes stainless piston. Order tungsten piston separately) $844.00 $844.00
Template - 50-60 degree $24.00 $24.00
100PSI gauge for air regulator $21.00 $21.00
Diamond Lap - 6" Dia. 1200 grit (replacement power hone lap) $22.00 $22.00
Engraving Stand with built in Turntable (shipping $55 within USA) $504.00 $504.00
Chasing Hammer with 38 Gram, 50RC Head assembled $87.50 $87.50
Diamond Lap - 6" Dia. 100 grit (replacement power hone lap) $45.00 $45.00
Ceramic Bench Stone (8" x 2" x 1/2") $59.00 $59.00
Sharpening fixture without templates $66.00 $66.00
Template - Ray Cover, Template Set $89.00 $89.00
Parallel Flat template $23.00 $23.00
Deluxe Foot Control Classic engraving set with sharpener $1,788.00 $1,788.00
Bench stone 1200 diamond grit (6" x 2" x 1/2") $39.00 $39.00
CarbaltXD with 0 Degree Taper (straight) - 5 pack $115.00 $115.00
Pin Vise $25.37 $25.37
Manual Stainless Palm-Push Adjustable Graver $49.00 $49.00
Stainless Handle for PalmControl $69.00 $69.00
NitroG20 AirGraver $1,295.00 $1,295.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Chasing Hammer - C: 20 grams - small face back end - hardened 58RC - left straw color after tempering $78.00 $78.00
Template - Flat & Knife Combo $23.00 $23.00
Bulldozer graver fixturer $28.00 $28.00
Template - Les Schowe Gold Inlay & Undercut $24.00 $24.00
NitroG20 AirGraver handpiece with PalmControl (burl wood handle) - PalmControl AirGravers are generally shipping 10 to 15 working days after receiving payment. $3,190.00 $3,190.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Template - Inverted 90 degree $22.00 $22.00
Basic Coin Carving Set (with two diamond bench stones, 260 grit and 1200 grit)) $253.00 $253.00
Template - Square Stipple $16.00 $16.00
Template - Onglette Right/Left $24.00 $24.00
Domer 3.5" diameter (shipping outside USA) $93.00 $93.00
NitroG20 AirGraver handpiece with PalmControl (Stainless Handle) - PalmControl AirGravers are generally shipping 10 to 15 working days after receiving payment. $3,049.00 $3,049.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Classic AirGraver (Includes stainless piston and tungsten piston). Note: An AirGraver foot controller required $1,120.00 $1,120.00
Foot control, idle adjust with dual regulators for controlling AirGraver handpiece (This item can only be ordered together with an AirGraver handpiece in the same order) $349.00 $349.00
Template - Stipple Set $56.00 $56.00
Classic AirGraver handpiece with PalmControl (supple Santoprene handle) PalmControl AirGravers are generally shipping 10 to 15 working days after receiving payment. $2,690.00 $2,690.00
CO2 Foot Pedal Controller for a Classic, Artisan or NitroG20 handpiece $329.00 $329.00
Colored Graver Bands $0.00 $0.00
CO2 125PSI Regulator with Intergrated 20oz CO2 paintball threads $83.00 $83.00
Damascus Handle for PalmControl $420.00 $420.00
Brass Practice Plate $11.00 $11.00
Template - Round bottom $23.00 $23.00
Template - Ray Cover, BrightCut $21.00 $21.00
Domer 3.5" diameter (Includes $14.60 shipping within USA) $107.60 $107.60
Bench stone 600 diamond grit (6" x 2" x 1/2") $39.00 $39.00
Arkansas stone 4" x 1/2" rectangle $24.00 $24.00
Domer 5" diameter (shipping outside USA) $136.00 $136.00
Piston - Light weight with nylon front end $135.00 $135.00
Template - MicroGraver Template Set $22.00 $22.00
Lindsay Graver Sharpener with all four diamond bench stones $225.00 $225.00
Artisan Collet - Addtional Collets for Artisan Handpiece $25.00 $25.00
Hammer head - 416 stainless 20 gram with small face back end (no handle) $68.00 $68.00

Ship to Country
Ship to Zip/Postal Code
Paypal's 3% fee? 
 
Subtotal $35,975.07
Paypal-fee $1,079.25
Total $37,054.32
 
Any changes above should be verified by pressing 'Recalculate' before clicking on 'Checkout'.
Select payment type: 
 

Show me my shopping cart every time I order something.