Quantity Name SKU Each Total
Domer 5" diameter (Includes $20 shipping within USA)
$156.00
$156.00
Morphing™ Fractal™ Jaws for Goliath or PalmControl Vise - down payment
$75.00
$75.00
Template - Onglette
$24.00
$24.00
Template - Inverted 110 degree
$22.00
$22.00
CarbaltXD - Three pieces with 3 degree taper & Two pieces with two Degree Taper, total five
$130.00
$130.00
Template - Extra Negative Detailing 96 degree (Make your grinding surface 1/4" higher than normal. For this you can set a diamond bench stone on a 1/4" thick plate or shim.)
$27.00
$27.00
Ring Blanks - set of three widths: 6mm, 4mm and 2mm - Works out to $5.78 each, but they are only sold as sets
$17.35
$17.35
Template - Dario Cortini Bulino
$21.00
$21.00
Adapter pins - 4 pack - for pin plates to adapt from 1/8" to the old slightly larger nail sized pin plates.
$10.00
$10.00
116 Standard "High Angle" template
$27.00
$27.00
Chasing Hammer - A: 17.5 - ball back end- hardened 58RC - left straw color after tempering
$78.00
$78.00
Bulldozer fixture and Arkansas stone
$58.00
$58.00
96 Standard "High Angle" template
$27.00
$27.00
FoolProof™ Graver Sharpener without diamond bench stones
$89.00
$89.00
Anti-Gravity™ with long post & its screw (No short post and no collets)
$134.00
$134.00
Diamond Lap - 6" Dia. 600 grit (replacement power hone lap)
$28.00
$28.00
Set #5 - Classic PalmControl ArtisticGraver (Burl handle) with standard nose with air regulator setup, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, PalmControls generally ship 9 months after receiving payment.
$3,069.00
$3,069.00
Add-on Spin option for Cosmos® ring holder
$38.00
$38.00
Quick Change Extension - Dual Index (5 pack)
$56.00
$56.00
Template - Hex Large Stipple
$16.00
$16.00
Template - Friction 80 degree with Uniform-Parallel Heel
$25.00
$25.00
replacement black rubber handle for AirGraver
$35.00
$35.00
Chasing Hammer B: 17.5 grams - ball back end- hardened 58RC - polished after tempering
$89.00
$89.00
Set #1** - Classic ArtistGraver with standard nose, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt, and 3 HSS graver blanks (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment)
$1,469.00
$1,469.00
Manual Palm-Push Graver Set with Sharpener
$219.95
$439.90
Set Includes: Adjustable Graver Handle, Sharpener with template, Diamond Bench Stone, Sharpened Carbalt™ Graver, Copper practice plate, Mirror-Grave™ Polishing Sheet, and Graver beads.
Anti-Gravity™ with short post & its screw (No long post and no collets)
$130.00
$130.00
Template 110 Lindsay Uniform-Parallel Heel
$23.00
$23.00
Set #10 - NitroG20, foot control air regulator setup, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment)
$1,669.00
$1,669.00
Nitro AirGravers are generally shipping in 2 to 5 weeks.
Reversing Offset AngleCollet™
$57.00
$57.00
Template - 60-70 degree
$24.00
$24.00
Set #8 - Classic PalmControl (Burl handle) with collet nose with air regulator setup, CO2 regulator, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Sharpener, Five Carbalt graver blanks, and five M48 graver blanks (PalmControl AirGravers are generally shipping 9 months after receiving payment.
$3,740.00
$3,740.00
Template - Inverted 105 degree
$22.00
$22.00
Chasing Hammer Handle - No Head
$15.00
$15.00
Artisan AirGraver handpiece with foot control, idle adjust with double regulators (Includes stainless piston. Order tungsten piston separately)
$1,071.00
$1,071.00
Piston - Standard Stainless
$125.00
$125.00
100PSI gauge for air regulator
$37.00
$37.00
Diamond Lap - 6" Dia. 1200 grit (replacement power hone lap)
$25.00
$25.00
Template - Carl Bleile - Sculpturing & Relief
$24.00
$24.00
96 Lower "High Angle" template
$27.00
$27.00
Template - Friction 90 degree with Uniform-Parallel Heel
$25.00
$25.00
Template - Ray Cover, Template Set
$89.00
$89.00
Brass Cosmos® Collet 6 fingers - Standard
$25.00
$50.00
Parallel Flat template
$23.00
$23.00
M48 Cobalt Graver Blanks (5 pack)
$60.00
$60.00
SoftIdle Stainless handle, if your handpiece hasn't had a metal handle before you'd need to return the handpiece so Steve can fit it on.
$64.00
$64.00
The SoftIdle handle is for foot controlled handpieces. In other words tt does not fit a PalmControl. If you have a rubber handle currently on your AirGraver handpiece this SolftIdle metal handle will replace the rubber handle. However it is required to send your handpiece in so that Steve can place a dimple in the correct location on the body of your handpiece so that the handle will stay in place. Please write a note in the box below that you will be sending your handpiece in after submitting this order. Steve will add the dimple and install the SoftIdle handle. When it is completed we will send a paypal request for the return shipping of your handpiece. Thank you. Here is the address: Lindsay Engraving & Tools 3714 West Cedar Hills Kearney, NE 68845
Ceramic Bench Stone
$67.00
$67.00
Bulldozer graver fixturer
$28.00
$28.00
High Speed Steel Square Graver Blanks (five pack)
$48.90
$48.90
Template - Inverted 90 degree
$22.00
$22.00
Template - Onglette Right/Left
$24.00
$24.00
Set #4 - Classic with collet nose, sharpener, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Five Carbalt graver blanks, and five M48 graver blanks (Foot Controlled AirGravers are generally shipping 7 working days after receiving payment)
$1,932.00
$1,932.00
#2 Cosmos® Collet
$39.00
$39.00
Set #11 - NitroG20, foot control air regulator setup, WITH sharpener set, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment)
$2,088.00
$2,088.00
Nitro AirGravers are generally shipping in 2 to 5 weeks.
Gravity Ring Holder for Goliath (centers only - order collets separate)
$57.00
$57.00
Anti-Gravity™ Watch & Ring Holder with two collets
$278.00
$278.00
#5 Cosmos® Collet
$69.00
$69.00
Threaded white plastic connector
$3.00
$3.00
Template - Ray Cover, BrightCut
$21.00
$21.00
Domer 3.5" diameter (Includes $20 shipping within USA)
$113.00
$0.00
Lindsay Accurate Dividers - with fire scale left inside of spring
$199.00
$199.00
BenchJewel™ Ring Holder
$349.00
$0.00
Lindsay Accurate Dividers - with fire scale removed inside of spring
$219.00
$219.00
