Product: Engraving Stand with built in Turntable (Shipping within USA only)
Out of Stock

QuantityNameSKUEachTotal
Domer 5" diameter (Includes $20 shipping within USA) $156.00 $156.00
Hammer head - 416 stainless 17.5 gram with ball back end (no handle) $68.00 $68.00
CarbaltXD with 3 Degree Taper - 5 pack $130.00 $130.00
Template - Inverted 80 degree $22.00 $22.00
Titan pins - hardened 7/8" long (protrude 1/2" above pin-plates) ten pack $9.00 $9.00
CarbaltXD - Three pieces with 3 degree taper & Two pieces with two Degree Taper, total five $130.00 $130.00
American Engravers III $75.00 $75.00
Engraving Historic Firarms $129.95 $129.95
Template - Extra Negative Detailing 96 degree $27.00 $27.00
Centers Short $10.00 $10.00
Piston - Light weight w/o nylon front end $125.00 $125.00
Basic Kentucky Long Rifle manual engraving set $236.00 $236.00
CamLock Vise jaw plates and accessories with twelve finger Cosmos collet $129.00 $129.00
   
Vise Leg Support $26.95 $26.95
NitroG20 AirGraver handpiece with PalmControl (supple Santoprene handle) - PalmControl AirGravers are generally shipping 60 working days (3 months) after receiving payment. $2,990.00 $2,990.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Rotary Foot disc pedal (for operating rotary handpieces) $89.00 $89.00
NitroG20 AirGraver handpiece with PalmControl (Damascus handle) $3,410.00 $3,410.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Chasing Hammer - A: 17.5 - ball back end- hardened 58RC - left straw color after tempering $78.00 $78.00
Template - Narrower $8.00 $8.00
Bulldozer fixture and Arkansas stone $58.00 $58.00
Vise: Glide-Lock Vise, large, very low profile (price includes $115 shipping within USA) $8,615.00 $8,615.00
HSS (High Speed Steel) Graver Blank $9.78 $9.78
Quick Change Extension - Single Index (5 pack) $47.50 $47.50
Template - Hex Large Stipple $16.00 $16.00
Basic Coin Carving Set (with three diamond bench stones) $292.00 $292.00
Bead Stone Setting Sharpening Set $377.50 $377.50
CamLock Vise jaw plates and accessories with six finger Cosmos collet $117.00 $117.00
   
Titan pins - Annealed steel 3/4" long (protrude 3/8" above pin-plates) ten pack $11.50 $11.50
Hammer head - 416 stainless 38 gram (1.4 oz) with small face back end (no handle) $68.00 $68.00
Chasing Hammer - F: 38 grams (1.4oz) - small face back end - hardened 58RC - polished after tempering $89.00 $89.00
Chasing Hammer - E: 38 grams (1.4oz) - small face back end - hardened 58RC - left straw color after tempering $78.00 $78.00
Template - Negative Detailing 96 degree $27.00 $27.00
Chasing Hammer B: 17.5 grams - ball back end- hardened 58RC - polished after tempering $89.00 $89.00
On/Off Toggle Switch for Auxiliary port $40.00 $40.00
PalmGraver - Burl Handled Mushroom AngleGraver $269.00 $269.00
Vise Holding Accessories $229.00 $229.00
Diamond Lap - 6" Dia. 260 grit (replacement power hone lap) $32.00 $32.00
CarbaltXD with 2 Degree Taper - 5 pack $130.00 $130.00
Vise: Stainless Glide-Lock Vise (price includes $115 shipping within USA) $8,615.00 $8,615.00
Border Scribe $69.00 $69.00
Bench stone 2000 diamond grit (6" x 2" x 1/2") $39.00 $39.00
CO2 adapter. For accepting the piercing type 16 gram threaded neck CO2 cartridges in a CO2 Regulator, that is normally for the 587 gram (20 oz) CO2 paintball cylinders. $78.00 $78.00
Classic AirGraver handpiece with PalmControl (burl wood handle) PalmControl AirGravers are generally shipping 60 working days (3 months) after receiving payment. $2,990.00 $2,990.00
Updating a foot control Classic or Artisan Airgraver handpiece to PalmControl - PalmControl AirGravers are generally shipping 60 working days (3 months) after receiving payment. $1,890.00 $1,890.00
Nickel Holder $67.00 $67.00
Portable PalmControl® Classic setup with basic sharpener - PalmControl AirGravers are being made and ready to ship around 4 months after receiving payment. $3,151.00 $3,151.00
Titan pins - hardened 3/4" long (protrude 3/8" above pin-plates) ten pack $8.00 $8.00
Nylon Washers for Centers $3.00 $3.00
Chasing Hammer Handle - No Head $15.00 $15.00
Deluxe Kentucky Long Rifle manual engraving set $426.00 $426.00
Chasing Hammer - D: 20 grams - small face back end - hardened 58RC - polished after tempering $89.00 $89.00
100PSI gauge for air regulator $21.00 $21.00
Template - Negative Universal 116 degree V Lindsay Uniform0Parallel Heel $27.00 $27.00
Engraving Stand with built in Turntable (Shipping within USA only) $499.00 $0.00
Chasing Hammer with 38 Gram, 50RC Head assembled $87.50 $87.50
Ceramic Bench Stone (8" x 2" x 1/2") $59.00 $59.00
Titan pins - hardened 5/8" long (protrude 1/4" above pin-plates) ten pack $7.00 $7.00
Set #2 - Classic ArtistGraver with standard nose with sharpener, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt, 3 HSS graver blanks, Five Carbalt graver blanks, and five M42 graver blanks (Foot Controlled AirGravers are generally shipping 7 working days after receiving payment) $1,888.00 $1,888.00
CarbaltXD with 0 Degree Taper (straight) - 5 pack $140.00 $140.00
Centers Long $12.00 $12.00
Stainless Handle for PalmControl $79.00 $79.00
NitroG20 AirGraver $1,429.00 $1,429.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Chasing Hammer - C: 20 grams - small face back end - hardened 58RC - left straw color after tempering $78.00 $78.00
Bulldozer graver fixturer $28.00 $28.00
NitroG20 AirGraver handpiece with PalmControl (burl wood handle) - PalmControl AirGravers are generally shipping Deluxe PalmControl Classic engraving set with sharpener - PalmControl AirGravers are shipping around 4 months after receiving payment.after receiving payment. $3,190.00 $3,190.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Basic Coin Carving Set (with two diamond bench stones, 260 grit and 1200 grit)) $253.00 $253.00
Domer 3.5" diameter (shipping outside USA) $93.00 $93.00
NitroG20 AirGraver handpiece with PalmControl (Stainless Handle) - PalmControl AirGravers are generally shipping 60 working days (3 months) after receiving payment. $3,049.00 $3,049.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Classic AirGraver - Standard nose Note: An AirGraver foot controller required $1,220.00 $1,220.00
Foot control, idle adjust with regulator for controlling AirGraver handpiece (This item can only be ordered together with an AirGraver handpiece in the same order) $385.00 $385.00
Classic AirGraver handpiece with PalmControl (supple Santoprene handle) PalmControl AirGravers are generally shipping 60 working days (3 months) after receiving payment. $2,790.00 $2,790.00
CO2 Foot Pedal Controller for a Classic, Artisan or NitroG20 handpiece $329.00 $329.00
CO2 125PSI Regulator with Intergrated 20oz CO2 paintball threads $83.00 $83.00
Damascus Handle for PalmControl $420.00 $420.00
Domer 3.5" diameter (Includes $20 shipping within USA) $113.00 $113.00
BenchJewel™ Ring Holder $349.00 $349.00
Arkansas stone 4" x 1/2" rectangle $24.00 $24.00
90lb Titan Engraving Ball Vise, This ships separate by FedEx ground from other items in your cart to USA lower 48 states. $1,775.00 $1,775.00
Domer 5" diameter (shipping outside USA) $136.00 $136.00
Jaw Plate A $36.00 $36.00
Piston - Light weight with nylon front end $135.00 $135.00
Template - MicroGraver Template Set $22.00 $22.00
Splitter for Auxiliary port $16.00 $16.00
Hammer head - 416 stainless 20 gram with small face back end (no handle) $68.00 $68.00

Ship to Country
Ship to Zip/Postal Code
Paypal? 
 
Subtotal $54,225.68
Tax $2,385.93
Total $56,611.61
 
Any changes above should be verified by pressing 'Recalculate' before clicking on 'Checkout'.
Select payment type: 
 

Show me my shopping cart every time I order something.