Quantity Name SKU Each Total
Piston - Light weight
$125.00
$125.00
Template - Bulino Set
$99.00
$99.00
Collet Adapter and one long collet - BenchJewel collet adapter - These fit a BenchJewel Graver or Classic (PC or FC) with a BenchJewel nose. One of these handpieces is require.
$31.00
$31.00
Template - 70 degree Bulino Lindsay Uniform-Parallel Heel
$27.00
$27.00
Bracelet Support (steel) Steel can rust. They are shipped with a light oil on them to help prevent rust. This oil should be cleaned off before gluing a bracelet around it.
$39.00
$39.00
Template - Friction set 80 90 100 & 110 degree with Uniform-Parallel Heel
$92.50
$92.50
Template - Mike Dubber - Speitzer point
$42.00
$42.00
Template - "Universal" 116 degree V Lindsay Uniform-Parallel Heel
$24.00
$24.00
Template - Inverted 110 degree
$22.00
$22.00
CarbaltXD presharpened graver point
$46.50
$46.50
Tungsten Dear Blow Piston
$125.00
$125.00
Template - Ray Cover, Background Flat
$23.00
$23.00
Template - Extra Negative Detailing 96 degree (Make your grinding surface 1/4" higher than normal. For this you can set a diamond bench stone on a 1/4" thick plate or shim.)
$27.00
$27.00
Template - Friction 110 degree with Uniform-Parallel Heel
$25.00
$25.00
Set #6 - Classic PalmControl ArtisticGraver (Burl handle) with standard nose, sharpener, with air regulator setup, CO2 Regulator, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks. Also includes: Five Carbalt graver blanks, and five M48 graver blanks (PalmControl AirGravers are generally shipping 9 months after receiving payment.
$3,571.00
$3,571.00
Basic Kentucky Long Rifle manual engraving set
$236.00
$236.00
Template - Dario Cortini Bulino
$21.00
$21.00
Adapter pins - 4 pack - for pin plates to adapt from 1/8" to the old slightly larger nail sized pin plates.
$10.00
$10.00
Set #5 - Classic PalmControl ArtisticGraver (Stainless SoftIdle handle) with standard nose with air regulator setup, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks (PalmControl AirGravers are generally shipping 9 months after receiving payment.
$3,079.00
$3,079.00
Set #6 - Classic PalmControl ArtisticGraver (Damascus SoftIdle handle) with standard nose, sharpener, with air regulator, CO2 regulator, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks. Also includes: Five Carbalt graver blanks, and five M48 graver blanks (PalmControl AirGravers are generally shipping 9 months after receiving payment.
$3,791.00
$3,791.00
116 Standard "High Angle" template
$27.00
$27.00
Chasing Hammer - A: 17.5 - ball back end- hardened 58RC - left straw color after tempering
$78.00
$78.00
Template - Narrower
$8.00
$8.00
Mushroom Straight PalmGraver
$49.00
$49.00
Rubber handle for PalmControl
$25.00
$25.00
116 Extra "High Angle" template
$27.00
$27.00
FoolProof™ Graver Sharpener without diamond bench stones
$89.00
$89.00
Anti-Gravity™ with long post & its screw (No short post and no collets)
$134.00
$134.00
HSS (High Speed Steel) Graver Blank
$9.78
$9.78
Diamond Lap - 6" Dia. 600 grit (replacement power hone lap)
$25.00
$25.00
Mandrel Lap adapter
$19.50
$19.50
Template - Phil Coggan Bulino
$21.00
$21.00
Add-on Spin option for Cosmos® ring holder
$38.00
$38.00
Set #12 - NitroG20 PalmControl, air regulator setup, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (PalmControl AirGravers are generally shipping 9 months after receiving payment.
$3,069.00
$3,069.00
Nitro AirGravers are generally shipping in 2 to 5 weeks.
Template - Hex Large Stipple
$16.00
$16.00
Diamond Spray Concentrate
$69.00
$69.00
Template - Inverted 100 degree
$22.00
$22.00
Knurled Nut
$9.00
$9.00
Chasing Hammer B: 17.5 grams - ball back end- hardened 58RC - polished after tempering
$89.00
$89.00
Set #1** - Classic ArtistGraver with standard nose, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt, and 3 HSS graver blanks (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment)
$1,469.00
$1,469.00
Manual Palm-Push Graver Set with Sharpener
$219.95
$439.90
Set Includes: Adjustable Graver Handle, Sharpener with template, Diamond Bench Stone, Sharpened Carbalt™ Graver, Copper practice plate, Mirror-Grave™ Polishing Sheet, and Graver beads.
Anti-Gravity special bolt with a hex hole at both ends. Includes wrench
$26.00
$26.00
Set #10 - NitroG20, foot control air regulator setup, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment)
$1,669.00
$1,669.00
Nitro AirGravers are generally shipping in 2 to 5 weeks.
Diamond Lap - 6" Dia. 260 grit (replacement power hone lap)
$32.00
$32.00
Template - Carl Bleile template set
$68.00
$68.00
AngleCollet™ - Long Reversing AngleCollet™
$26.00
$26.00
Angled Extension - 5 pack angled extension - full hardened stainless
$120.00
$120.00
$50 Gift Card for use toward Lindsay Tools: AirGraver.com
$50.00
$50.00
Bench stone 2000 diamond grit (6" x 2" x 1/2")
$39.00
$39.00
Template - 60-70 degree
$24.00
$24.00
Nickel Holder
$67.00
$67.00
Template - Inverted 105 degree
$22.00
$22.00
Portable PalmControl® Classic setup with basic sharpener - PalmControl AirGravers are being made and ready to ship around 9 months after receiving payment.
$3,151.00
$3,151.00
Template - All five of the inverted point templates
$110.00
$110.00
Collets Short - Two pack of BenchJewel short collets - These fit a BenchJewel or Classic (PC or FC) with a BenchJewel nose. One of these handpieces is require.
$26.00
$26.00
Chasing Hammer Handle - No Head
$15.00
$15.00
Set #7 - Classic PalmControl (Santophrene handle) with collet nose with air regulator setup, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. (PalmControl AirGravers are generally shipping 9 months after receiving payment.
$2,913.00
$2,913.00
Template - Ray Cover, Standard 90 traditional triangle heel
$21.00
$21.00
Piston - Standard Stainless
$125.00
$125.00
Template - 50-60 degree
$24.00
$24.00
Set #6 - Classic PalmControl ArtisticGraver (Santophrene handle) with standard nose, sharpener, with air regulator, CO2 regulator, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks. Also includes: Five Carbalt graver blanks, and five M48 graver blanks (PalmControl AirGravers are generally shipping 9 months after receiving payment.
$3,371.00
$3,371.00
Template - "Calligraphy" 123.2 degree Lindsay Uniform-Parallel Heel
$23.00
$23.00
100PSI gauge for air regulator
$27.00
$27.00
Diamond Lap - 6" Dia. 1200 grit (replacement power hone lap)
$22.00
$22.00
Template - Friction 90 degree with Uniform-Parallel Heel
$25.00
$25.00
FoolProof™ sharpening fixture (aka Lindsay sharpening fixture) without templates
$66.00
$66.00
M42 Graver Blanks (two pack) - NOTICE M42 have been replaced by M48 that is more durable than M42. You may contiune your order, but be aware we will ship M48 graver blanks rather than M42 graver blanks.
$25.00
$25.00
MasterGraver manual push with metal Mushroom
$89.00
$89.00
Parallel Flat template
$23.00
$23.00
Template - Friction 100 degree with Uniform-Parallel Heel
$25.00
$25.00
Set #2 - Classic ArtistGraver with standard nose with sharpener, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt, 3 HSS graver blanks, Five Carbalt graver blanks, and five M48 graver blanks (Foot Controlled AirGravers are generally shipping 7 working days after receiving payment)
$1,888.00
$1,888.00
CarbaltXD with 0 Degree Taper (straight) - 5 pack
$140.00
$140.00
Hex wrench
$1.60
$1.60
Collets Long - Two pack of BenchJewel long collets - These fit a BenchJewel Graver or Classic (PC or FC) with a BenchJewel nose. One of these handpieces is require.
$27.00
$27.00
Template - Flat & Knife Combo
$24.00
$24.00
Bulldozer graver fixturer
$28.00
$28.00
Flat/Knife Standard "High Angle" template
$26.00
$26.00
Set #4 - Classic with collet nose, sharpener, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Five Carbalt graver blanks, and five M48 graver blanks (Foot Controlled AirGravers are generally shipping 7 working days after receiving payment)
$1,932.00
$1,932.00
#2 Cosmos® Collet
$39.00
$39.00
SoftIdle handle for PalmControl handpiece. These are a very close fit. When installing do not force it. Since it is so close of fit only do some wiggling without force to get the handle started before it will slide on with a slip fit.
$210.00
$210.00
Colored Graver Bands
$0.00
$0.00
CO2 125PSI Regulator with Intergrated 20oz CO2 paintball threads
$83.00
$83.00
Gravity Ring Holder for Goliath (centers only - order collets separate)
$57.00
$57.00
Anti-Gravity™ Watch & Ring Holder with two collets
$253.00
$253.00
Change the standard nose on your Classic for the BenchJewel collet nose - After placing the order pleaxse print the email receipt and include it with your Classic shippment so we know why you have sent your Classic in. Includes: one short collet, one long collet and one collet adapter. Order additional BenchJewel collets as needed. Price does not include return shipping. We will send a paypal request when the work is finished for fedex return shipping.
$135.00
$135.00
Quick Change Extension - Quad Index (5 pack)
$47.50
$47.50
Template - Carl Bleile - Deep Line & BankNote
$32.00
$32.00
Splitter for Auxiliary port
$16.00
$16.00
FoolProof™ Sharpening fixture (aka Lindsay sharpening fixture) with all four diamond bench stones
$225.00
$225.00
Collet for Nitrog20 or Artisan Handpiece
$25.00
$25.00
Hammer head - 416 stainless 20 gram with small face back end (no handle)
$68.00
$68.00
