Quantity Name SKU Each Total
Domer 5" diameter (Includes $20 shipping within USA)
$156.00
$156.00
Hammer head - 416 stainless 17.5 gram with ball back end (no handle)
$68.00
$68.00
CarbaltXD with 3 Degree Taper - 5 pack
$130.00
$130.00
Template - 70 degree Bulino Lindsay Uniform-Parallel Heel
$27.00
$27.00
Bracelet Support (steel) Steel can rust. They are shipped with a light oil on them to help prevent rust. This oil should be cleaned off before gluing a bracelet around it.
$39.00
$39.00
threaded metal barb 1/8
$3.50
$3.50
Template - Inverted 80 degree
$22.00
$22.00
Template - Onglette
$24.00
$24.00
Template - "Universal" 116 degree V Lindsay Uniform-Parallel Heel
$24.00
$24.00
CarbaltXD - Three pieces with 3 degree taper & Two pieces with two Degree Taper, total five
$130.00
$130.00
Template - Extra Negative Detailing 96 degree
$27.00
$27.00
Carbide Dental Bur
$2.00
$2.00
Adapter pins - 4 pack - for pin plates to adapt from 1/8" to the old slightly larger nail sized pin plates.
$10.00
$10.00
Chasing Hammer - A: 17.5 - ball back end- hardened 58RC - left straw color after tempering
$78.00
$78.00
Template - Narrower
$8.00
$8.00
Bulldozer fixture and Arkansas stone
$58.00
$58.00
M42 Cobalt Graver Blanks (5 pack)
$55.00
$55.00
Anti-Gravity™ with long post & its screw (No short post and no collets)
$134.00
$134.00
HSS (High Speed Steel) Graver Blank
$9.78
$9.78
Mandrel Lap adapter
$19.50
$19.50
Add-on Spin option for Cosmos® ring holder
$38.00
$38.00
Set #12 - NitroG20 PalmControl, air regulator setup, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (PalmControl AirGravers are generally shipping 4 months after receiving payment.
$3,069.00
$3,069.00
Nitro AirGravers are generally shipping in 2 to 5 weeks.
Template - Hex Large Stipple
$16.00
$16.00
Basic Coin Carving Set (with three diamond bench stones)
$292.00
$292.00
Bead Stone Setting Sharpening Set
$377.50
$377.50
#4 Cosmos® Collet
$69.00
$69.00
Chasing Hammer B: 17.5 grams - ball back end- hardened 58RC - polished after tempering
$89.00
$89.00
Anti-Gravity™ with short post & its screw (No long post and no collets)
$130.00
$130.00
On/Off Toggle Switch for Auxiliary port
$40.00
$40.00
Anti-Gravity special bolt with a hex hole at both ends. Includes wrench
$26.00
$26.00
Set #10 - NitroG20, foot control air regulator setup, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment)
$1,669.00
$1,669.00
Nitro AirGravers are generally shipping in 2 to 5 weeks.
PalmGraver - Burl Handled Mushroom AngleGraver
$269.00
$0.00
Diamond Lap - 6" Dia. 260 grit (replacement power hone lap)
$32.00
$32.00
Template - Carl Bleile template set
$68.00
$68.00
Template - "Detailing" 96.3 degree V Lindsay Uniform-Parallel Heel
$23.00
$23.00
CarbaltXD with 2 Degree Taper - 5 pack
$130.00
$130.00
Cast Iron round lap
$59.00
$0.00
Template 80 Lindsay Uniform-Parallel Heel
$24.00
$24.00
Border Scribe
$69.00
$69.00
Bench stone 2000 diamond grit (6" x 2" x 1/2")
$39.00
$39.00
CO2 adapter. For accepting the piercing type 16 gram threaded neck CO2 cartridges in a CO2 Regulator, that is normally for the 587 gram (20 oz) CO2 paintball cylinders.
$78.00
$78.00
Template - 60-70 degree
$24.00
$24.00
Updating a foot control Classic handpiece to PalmControl (santophren rubber handle)
$1,979.00
$1,979.00
Nickel Holder
$67.00
$67.00
Set #13 - NitroG20 PalmControl, air regulator setup, sharpener set, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (PalmControl AirGravers are generally shipping 4 months after receiving payment.
$3,443.00
$3,443.00
Nitro AirGravers are generally shipping in 2 to 5 weeks.
Set #8 - Classic PalmControl (Burl handle) with collet nose with air regulator setup, CO2 regulator, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Sharpener, Five Carbalt graver blanks, and five M42 graver blanks (PalmControl AirGravers are generally shipping 4 months after receiving payment.
$3,740.00
$3,740.00
Template - Inverted 105 degree
$22.00
$22.00
Template - All five of the inverted point templates
$110.00
$110.00
Chasing Hammer Handle - No Head
$15.00
$15.00
Classic AirGraver handpiece with HandControl (supple Santoprene handle) HandControl AirGravers are generally shipping 4 months after receiving payment.
$2,790.00
$2,790.00
Set #7 - Classic PalmControl (Santophrene handle) with collet nose with air regulator setup, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. (PalmControl AirGravers are generally shipping 4 months after receiving payment.
$2,913.00
$2,913.00
Template - Ray Cover, Standard 90 traditional triangle heel
$21.00
$21.00
Chasing Hammer - D: 20 grams - small face back end - hardened 58RC - polished after tempering
$89.00
$0.00
Template - 50-60 degree
$24.00
$24.00
Template - "Calligraphy" 123.2 degree Lindsay Uniform-Parallel Heel
$23.00
$23.00
Template 90 Lindsay Uniform-Parallel Heel
$24.00
$24.00
Enhancement of Classic adjust-collar - If this is an upgrade to an earlier un-engraved Classic, send your Classic in and when completed we will send a paypal request for the fedex return shipping.
$115.00
$115.00
100PSI gauge for air regulator
$27.00
$27.00
Diamond Lap - 6" Dia. 1200 grit (replacement power hone lap)
$22.00
$22.00
Template - Carl Bleile - Sculpturing & Relief
$24.00
$24.00
Engraving Stand with built in Turntable (Shipping within USA only)
$599.00
$599.00
Template - Round Stipple
$16.00
$16.00
Engraving Historic Firarms
$129.95
$129.95
Chasing Hammer with 38 Gram, 50RC Head assembled
$87.50
$0.00
Bracelet Support (aluminum)
$39.00
$0.00
Template - Friction 90 degree with Uniform-Parallel Heel
$25.00
$25.00
Diamond Lap - 6" Dia. 100 grit (replacement power hone lap)
$45.00
$45.00
Mirror-Grave™ Polishing Sheet
$10.00
$10.00
Ceramic Bench Stone
$59.00
$59.00
FoolProof™ sharpening fixture (aka Lindsay sharpening fixture) without templates
$66.00
$66.00
Template - Ray Cover, Template Set
$89.00
$89.00
Parallel Flat template
$23.00
$23.00
Template - Friction 100 degree with Uniform-Parallel Heel
$25.00
$25.00
M48 Cobalt Graver Blanks (5 pack)
$60.00
$60.00
Bench stone 1200 diamond grit (6" x 2" x 1/2")
$39.00
$39.00
Quick Change Extension - Single Index (1 pack)
$11.00
$11.00
CarbaltXD with 0 Degree Taper (straight) - 5 pack
$140.00
$140.00
Chasing Hammer - C: 20 grams - small face back end - hardened 58RC - left straw color after tempering
$78.00
$0.00
Set #7 - Classic PalmControl (Burl handle) with collet nose with air regulator setup, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. (PalmControl AirGravers are generally shipping 4 months after receiving payment.
$3,113.00
$3,113.00
Template - Flat & Knife Combo
$24.00
$24.00
Modified FoolProof™ sharpening fixture (aka Lindsay sharpening fixture) to hold extensions.
$96.00
$96.00
Bulldozer graver fixturer
$28.00
$28.00
Template 105 Lindsay Uniform-Parallel Heel
$24.00
$24.00
Template - Les Schowe Gold Inlay & Undercut
$24.00
$24.00
Template - Carl Bleile - Scraper
$15.00
$15.00
Template - Inverted 90 degree
$22.00
$22.00
Basic Coin Carving Set (with two diamond bench stones, 260 grit and 1200 grit))
$253.00
$253.00
Template - Square Stipple
$16.00
$16.00
Template - Onglette Right/Left
$24.00
$24.00
Domer 3.5" diameter (shipping outside USA)
$93.00
$93.00
Set #4 - Classic with collet nose, sharpener, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Five Carbalt graver blanks, and five M42 graver blanks (Foot Controlled AirGravers are generally shipping 7 working days after receiving payment)
$1,932.00
$1,932.00
#2 Cosmos® Collet
$39.00
$39.00
Template - Stipple Set
$56.00
$56.00
Set #11 - NitroG20, foot control air regulator setup, WITH sharpener set, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment)
$2,088.00
$2,088.00
Nitro AirGravers are generally shipping in 2 to 5 weeks.
Colored Graver Bands
$0.00
$0.00
CO2 125PSI Regulator with Intergrated 20oz CO2 paintball threads
$83.00
$83.00
Gravity Ring Holder for Goliath (centers only - order collets separate)
$57.00
$0.00
Anti-Gravity™ Watch & Ring Holder with two collets
$253.00
$253.00
#5 Cosmos® Collet
$69.00
$69.00
Set #3 - Classic with collet nose, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. (Foot Controlled AirGravers are generally shipping 7 working days after receiving payment)
$1,513.00
$1,513.00
Gravity Ring Holder for PC Vise (centers only - order collets separate)
$49.00
$49.00
Template - Round bottom
$23.00
$23.00
Template - Ray Cover, BrightCut
$21.00
$21.00
Domer 3.5" diameter (Includes $20 shipping within USA)
$113.00
$113.00
Change the standard nose on your Classic for the BenchJewel collet nose - Includes: one short collet, one long collet and one collet adapter. Order additional BenchJewel collets as needed. Price does not include return shipping. We will send a paypal request when the work is finished for fedex return shipping.
$135.00
$135.00
Bench stone 600 diamond grit (6" x 2" x 1/2")
$39.00
$39.00
Quick Change Extension - Quad Index (5 pack)
$47.50
$47.50
BenchJewel™ Ring Holder
$349.00
$0.00
Arkansas stone 4" x 1/2" rectangle
$24.00
$24.00
Set #8 - Classic PalmControl (Santophrene handle) with collet nose with air regulator and CO2 regulator: includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Sharpener, Five Carbalt graver blanks, and five M42 graver blanks (PalmControl AirGravers are generally shipping 4 months after receiving payment.
$3,540.00
$3,540.00
Domer 5" diameter (shipping outside USA)
$136.00
$136.00
Anti-Gravity™ With both long & short posts (no collets)
$159.00
$159.00
Template - MicroGraver Template Set
$22.00
$22.00
Template - Carl Bleile - Deep Line & BankNote
$32.00
$32.00
Splitter for Auxiliary port
$16.00
$16.00
FoolProof™ Sharpening fixture (aka Lindsay sharpening fixture) with all four diamond bench stones
$225.00
$225.00
Hammer head - 416 stainless 20 gram with small face back end (no handle)
$68.00
$68.00
