Product: PalmGraver - Burl Handled Mushroom AngleGraver
Out of Stock

Product: Chasing Hammer - D: 20 grams - small face back end - hardened 58RC - polished after tempering
Out of Stock

Product: Engraving Stand with built in Turntable (Shipping within USA only)
Out of Stock

Product: Chasing Hammer with 38 Gram, 50RC Head assembled
Out of Stock

Product: Bracelet Support (aluminum and halved)
Out of Stock

Product: Chasing Hammer - C: 20 grams - small face back end - hardened 58RC - left straw color after tempering
Out of Stock

Product: Gravity Ring Holder for PC Vise (centers only - order collets separate)
Out of Stock

QuantityNameSKUEachTotal
Domer 5" diameter (Includes $20 shipping within USA) $156.00 $156.00
Hammer head - 416 stainless 17.5 gram with ball back end (no handle) $68.00 $68.00
CarbaltXD with 3 Degree Taper - 5 pack $130.00 $130.00
Template - 70 degree Bulino Lindsay Uniform-Parallel Heel $27.00 $27.00
Bracelet Support (steel and a full cylinder) $39.00 $39.00
   
threaded metal barb 1/8 $3.50 $3.50
Template - Inverted 80 degree $22.00 $22.00
Template - Onglette $24.00 $24.00
Template - "Universal" 116 degree V Lindsay Uniform-Parallel Heel $24.00 $24.00
CarbaltXD - Three pieces with 3 degree taper & Two pieces with two Degree Taper, total five $130.00 $130.00
Template - Extra Negative Detailing 96 degree $27.00 $27.00
Centers Short $12.00 $12.00
CamLock Vise jaw plates and accessories with with twelve finger Cosmos® collet $147.00 $147.00
Carbide Dental Bur $2.00 $2.00
Adapter pins - 4 pack - for pin plates to adapt from 1/8" to the old slightly larger nail sized pin plates. $10.00 $10.00
Chasing Hammer - A: 17.5 - ball back end- hardened 58RC - left straw color after tempering $78.00 $78.00
Template - Narrower $8.00 $8.00
Bulldozer fixture and Arkansas stone $58.00 $58.00
M42 Cobalt Graver Blanks (5 pack) $55.00 $55.00
Anti-Gravity™ with long post & its screw (No short post and no collets) $134.00 $134.00
   
HSS (High Speed Steel) Graver Blank $9.78 $9.78
Mandrel Lap adapter $19.50 $19.50
Add-on Spin option for Cosmos® ring holder $38.00 $38.00
Quick Change Extension - Single Index (5 pack) $47.50 $47.50
Set #12 - NitroG20 PalmControl, air regulator setup, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (PalmControl AirGravers are generally shipping 4 months after receiving payment. $3,069.00 $3,069.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Template - Hex Large Stipple $16.00 $16.00
Basic Coin Carving Set (with three diamond bench stones) $292.00 $292.00
Bead Stone Setting Sharpening Set $377.50 $377.50
Chasing Hammer B: 17.5 grams - ball back end- hardened 58RC - polished after tempering $89.00 $89.00
On/Off Toggle Switch for Auxiliary port $40.00 $40.00
Set #10 - NitroG20, foot control air regulator setup, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment) $1,669.00 $1,669.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
PalmGraver - Burl Handled Mushroom AngleGraver $269.00 $0.00
Vise Holding Accessories $229.00 $229.00
Diamond Lap - 6" Dia. 260 grit (replacement power hone lap) $32.00 $32.00
Template - "Detailing" 96.3 degree V Lindsay Uniform-Parallel Heel $23.00 $23.00
CarbaltXD with 2 Degree Taper - 5 pack $130.00 $130.00
Template 80 Lindsay Uniform-Parallel Heel $24.00 $24.00
Border Scribe $69.00 $69.00
Bench stone 2000 diamond grit (6" x 2" x 1/2") $39.00 $39.00
CO2 adapter. For accepting the piercing type 16 gram threaded neck CO2 cartridges in a CO2 Regulator, that is normally for the 587 gram (20 oz) CO2 paintball cylinders. $78.00 $78.00
Classic AirGraver handpiece with PalmControl (burl wood handle) PalmControl AirGravers are generally shipping 4 months after receiving payment. $2,990.00 $2,990.00
Updating a foot control Classic or Artisan Airgraver handpiece to PalmControl - PalmControl AirGravers are generally shipping 4 months after receiving payment. $1,890.00 $1,890.00
Nickel Holder $67.00 $67.00
Set #13 - NitroG20 PalmControl, air regulator setup, sharpener set, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (PalmControl AirGravers are generally shipping 4 months after receiving payment. $3,443.00 $3,443.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
Set #8 - Classic PalmControl (Burl handle) with collet nose with air regulator setup, CO2 regulator, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Sharpener, Five Carbalt graver blanks, and five M42 graver blanks (PalmControl AirGravers are generally shipping 4 months after receiving payment. $3,740.00 $3,740.00
Chasing Hammer Handle - No Head $15.00 $15.00
Classic AirGraver handpiece with HandControl (supple Santoprene handle) HandControl AirGravers are generally shipping 4 months after receiving payment. $2,790.00 $2,790.00
Set #7 - Classic PalmControl (Santophrene handle) with collet nose with air regulator setup, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. (PalmControl AirGravers are generally shipping 4 months after receiving payment. $2,913.00 $2,913.00
Template - Ray Cover, Standard 90 traditional triangle heel $21.00 $21.00
Chasing Hammer - D: 20 grams - small face back end - hardened 58RC - polished after tempering $89.00 $0.00
Template - 50-60 degree $24.00 $24.00
Enhancement of Classic adjust-collar - If this is an upgrade to an earlier un-engraved Classic, send your Classic in and when completed we will send a paypal request for the fedex return shipping. $115.00 $115.00
100PSI gauge for air regulator $27.00 $27.00
Engraving Stand with built in Turntable (Shipping within USA only) $554.00 $0.00
Template - Round Stipple $16.00 $16.00
Chasing Hammer with 38 Gram, 50RC Head assembled $87.50 $0.00
Bracelet Support (aluminum and halved) $50.00 $0.00
   
Ceramic Bench Stone (8" x 2" x 1/2") $59.00 $59.00
Template - Ray Cover, Template Set $89.00 $89.00
M48 Cobalt Graver Blanks (5 pack) $60.00 $60.00
CarbaltXD with 0 Degree Taper (straight) - 5 pack $140.00 $140.00
Centers Long $14.00 $14.00
Leather Ring Fixture for engraving vise pin plates $56.00 $56.00
Chasing Hammer - C: 20 grams - small face back end - hardened 58RC - left straw color after tempering $78.00 $0.00
Set #7 - Classic PalmControl (Burl handle) with collet nose with air regulator setup, includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. (PalmControl AirGravers are generally shipping 4 months after receiving payment. $3,113.00 $3,113.00
Modified FoolProof™ sharpening fixture (aka Lindsay sharpening fixture) to hold extensions. $96.00 $96.00
Bulldozer graver fixturer $28.00 $28.00
Template - Les Schowe Gold Inlay & Undercut $24.00 $24.00
Basic Coin Carving Set (with two diamond bench stones, 260 grit and 1200 grit)) $253.00 $253.00
Domer 3.5" diameter (shipping outside USA) $93.00 $93.00
Set #4 - Classic with collet nose, sharpener, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Five Carbalt graver blanks, and five M42 graver blanks (Foot Controlled AirGravers are generally shipping 7 working days after receiving payment) $1,932.00 $1,932.00
#2 Cosmos® Collet $39.00 $39.00
Classic AirGraver handpiece with PalmControl (supple Santoprene handle) PalmControl AirGravers are generally shipping 4 months after receiving payment. $2,790.00 $2,790.00
Set #11 - NitroG20, foot control air regulator setup, WITH sharpener set, tungsten piston, one presharpened HSS and 3 HSS graver blanks. (Foot Controlled AirGravers are generally shipping 10 working days after receiving payment) $2,088.00 $2,088.00
 Nitro AirGravers are generally shipping in 2 to 5 weeks.
 
CO2 125PSI Regulator with Intergrated 20oz CO2 paintball threads $83.00 $83.00
Gravity Ring Holder for Goliath (centers only - order collets separate) $57.00 $57.00
Set #3 - Classic with collet nose, foot control regulator setup, includes stainless and tungsten pistons, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. (Foot Controlled AirGravers are generally shipping 7 working days after receiving payment) $1,513.00 $1,513.00
Gravity Ring Holder for PC Vise (centers only - order collets separate) $49.00 $0.00
Template - Ray Cover, BrightCut $21.00 $21.00
Domer 3.5" diameter (Includes $20 shipping within USA) $113.00 $113.00
Change the standard nose on your Classic for the BenchJewel collet nose - Includes: one short collet, one long collet and one collet adapter. Order additional BenchJewel collets as needed. Price does not include return shipping. We will send a paypal request when the work is finished for fedex return shipping. $85.00 $85.00
Bench stone 600 diamond grit (6" x 2" x 1/2") $39.00 $39.00
BenchJewel™ Ring Holder $349.00 $349.00
Arkansas stone 4" x 1/2" rectangle $24.00 $24.00
Set #8 - Classic PalmControl (Santophrene handle) with collet nose with air regulator and CO2 regulator: includes stainless piston, one presharpened Carbalt and 3 HSS graver blanks, one short collet, one long collet, and adapter. Also includes: Sharpener, Five Carbalt graver blanks, and five M42 graver blanks (PalmControl AirGravers are generally shipping 4 months after receiving payment. $3,540.00 $3,540.00
Domer 5" diameter (shipping outside USA) $136.00 $136.00
Anti-Gravity™ With both long & short posts (no collets) $159.00 $159.00
   
Jaw Plate A $41.00 $41.00
Template - MicroGraver Template Set $22.00 $22.00
Splitter for Auxiliary port $16.00 $16.00
FoolProof™ Sharpening fixture (aka Lindsay sharpening fixture) with all four diamond bench stones $225.00 $225.00
Hammer head - 416 stainless 20 gram with small face back end (no handle) $68.00 $68.00

Ship to Country
Ship to Zip/Postal Code
Paypal?  
 
Subtotal $42,861.78
Payment method fee $1,885.92
Total $44,747.70

Credit Code If you have a credit code, enter the code and press recalculate
 
Any changes above should be verified by pressing 'Recalculate' before clicking on 'Checkout'.
Select payment type: 
 

Show me my shopping cart every time I order something.