|
ARTISAN
AIRGRAVER
The Artisan AirGraver has a patent pending improved collet design that helps the tool deliver impacts more
efficiently. The tool is a work horse for jewelers. Speed range: 2400 at idle through 10,000 at 60 PSI when used with the included stainless piston. When used
with a tungsten dead blow piston; 1500 at idle through 7,000 at 60 PSI. Three handpiece tubing attachment locations for customability and comfort. Non-slip
rubber handle.
Nose collets are S7 tool steel, hardened and tempered to 57 Rockwell. Cylindrical precision ground
for a life time of service.
Includes: Stainless body, two quick change collets, two high speed graver blanks (not sharpened),
supple black rubber handle. The tool uses the same dead blow bore and pistons as the Classic AirGraver handpiece for interchangeability and also includes a hex
wrench, handpiece tubing and fitting, and owner’s manual.
The Artisan handpiece does not have the patented stroke adjustment. Additional power if needed is
attained by purchasing a tungsten dead blow piston.
Artisan AirGraver Handpiece (comes with stainless piston):
$595
Artisan
handpiece with
Foot control, idle adjust without regulators:
$774
Artisan
handpiece with Foot Control, idle adjust with dual regulators:
$844
Artisan
handpiece with PalmControl:
$2290
Additional Collets:
$25 each
Tungsten dead blow piston for additional power: $125
|
